Both feet on the ground

Reading Time: 9 minutes

Lighting maintenance without leaving the ground

Make your job safer, faster and easier with V-Spring telescoping safety light poles from Eaton Crouse-Hinds.

Designed for safety

Whether it’s a new installation or a replacement project, lighting maintenance tasks can be dangerous, labour-intensive and costly – especially in hard to reach or areas where safety is a big concern.

V-Spring poles eliminate the need for portable ladders or fall protection equipment, making working on lighting a safe, single-person operation where both feet can remain on the ground.

Ideal for fixtures installed on industrial walkways, platforms, stairways and conveyors in hazardous or industrial applications where OSHA/HSE regulations require fall prevention equipment.

Any-time flexibility

With an adjustable height of 5 ft up to 10 ft and full 360°, V-Spring poles offer full rotation and height adjustment after installation for effortless positioning and re-positioning of light.

The spring assisted movement requires less force so removes worker-strain and with no pinch points, operators will have added protection for hands and fingers.

The vertical travel of the V-Spring also ensures the luminaire housing will not fall from the mounting module hinge hook. This allows the luminaire housing to properly hang during installation and maintenance with no risk of dropped or falling ballasts.

Retrofit Installation Steps

High Pressure Hose Test

At a glance

Increases safety and decreases labour costs associated with lighting installation and routine maintenance.
All work safely takes place on the platform or walkway, eliminating the need for portable ladders and fall protection equipment.
Designed to withstand corrosive agents, vibration and extreme temperatures.
Easily direct lighting after installation with one product covering multiple mounting heights and 360° rotation.
Provides true controlled lowering with spring assistance, no pinch points and less force on handrails.
Multiple fixture capability and innovative mounting module hinge-hook to eliminate the risk of falling luminaires or ballasts.
Rated for corrosive, wet, dusty, hot and cold conditions with Internal conduit for cable protection and moisture resistance.

An easy decision

If you are looking to upgrade your facility’s lighting technology, use the V-Spring telescoping pole as a labour-saving installation tool.

The safe and simple replacement of existing lighting systems and additional savings from ongoing inspection and maintenance of the luminaire throughout its life cycle make V-Spring an easy decision for your facility.